Speedtech G Body Rear Trailing Arm Manual de usuario

1 | P a g e May 14, 2014 78-88 G Body Rear Trailing Arm Kit Parts in this kit may vary slightly from photo. The following instructions are inten

2 | P a g e A Body Rear Trailing Arm Hardware Kit Checklist Installation Instructions (1) Articulink Upper Trailing Arm (2) Articulink Lower

3 | P a g e The vehicle should be on a level surface before you start. 1. In a couple short hours you can update your Chevelle with new Speedtec

4 | P a g e 5. Using the new bolts install the Speedtech upper trailing arms with the grease fitting pointing downward.

5 | P a g e 5. Remove the factory lower trailing arms. Adjust the Speedtech lowers as needed in the same manner as the uppers. Install the trailing

6 | P a g e Sway Bar Installation 1. Use the sway bar hardware to attach bar to the rear axle. Do not fully tighten at this time. See sway bar in

7 | P a g e 7. Be sure all bolts are tight. Speedtech Performance USA LLC 435-628-4300 www.speedtechperformance.com Copyright Spee

8 | P a g e Terms and Conditions of Sale 1. Effective January, 2008, supersedes all previous policy statements. Policies are subject to change with